Section
Drop element here

Light

Levitation isn't hard, but it requires a bit of practice and patience. Expect that it may take numerous attempts before you become a levitation master.

Before you start

Make sure the base is standing on a flat surface and that there are no metals or other magnets nearby - even a metal beam underneath a wooden table can interfere with the proper functioning of the unit.

Keep in mind

After numerous failed set-up attempts the levitation circuit which is embedded with a safety feature will automatically shut off. You will notice it when the bulb fails to support its own weight. If this happens, simply unplug the device and wait 5-10 minutes. Plug it back in and try again.

First step

Place the magnetic base on a flat, non-metallic surface. Connect the textile cable to the magnetic base and the other end of the cable to the AC Adapter. Plug it into the outlet.

The textile cable connecting to the Flyte magnetic base

Second step

Raise the lightbulb approximately 20 cm / 8 inches directly over the base and slowly lower it down, aiming for the exact center.

A bulb is placed on the magnetic base

Third step

When you feel the lightbulb push back, gently let go. 

A bulb is placed on the magnetic base

How to video

Here's an instructional video that shows the setup process step-by-step. If you experience any problems with the setup, feel free to reach out to us by using the contact form at the bottom of this page.

Additional information

English

German

French

Spanish

Japanese

Chinese

Contact us

Name*

Email*

Message*

Want to hear
from us?

We will update you about new products, new experiments and just keep in touch for a little magic in your life

Follow us

Graphic of arrow pointing towards up, press to scroll to the top of the page
Image of Flyte logo

Shop

About

Contact

For professionals

FAQ & Delivery

Returns & Refunds

Levitation Tips

Replacements

Privacy Policy